Installation - NEC Express5800/B120e-h User Manual

Chapter 2 Preparations

1.9.1 Installation

Install the Trusted Platform Module Kit according to the following procedure:
1. Remove the top cover according to Chapter 2 (1.3.1 Removal of top cover).
2. Insert the projection of Trusted Platform Module Kit into the groove on CPU blade chassis, and slowly
move Trusted Platform Module Kit until the connector on Trusted Platform Module Kit is aligned with
Trusted Platform Module Kit connector on CPU blade.
3. Mount Trusted Platform Module Kit to the CPU blade and secure it with a single screw.
70
•
Important Do not touch the terminals of the card with your bare hand. Fingerprints and
dust left on it causes the CPU blade to malfunction.
•
Insert TPM perpendicularly into the connector. Inserting Trusted Platform
Module Kit with being inclined may damage connector pins and/or connectors.
•
If you have trouble installing the Trusted Platform Module Kit, remove the TPM
once and try again. If you apply excessive pressure on Trusted Platform
Module Kit, a Trusted Platform Module Kit might be damaged.
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices