Chapter 2 Preparations
1.6.3 Removal
To remove Mezzanine card, remove the top cover and air duct according to Chapter 2 (1.3.1 Removal of top
cover) and (1.3.2 Removal of air duct), and then perform steps in Chapter 2 (1.6.2 Installation) in reverse order.
After Mezzanine card is removed, make sure that no error message appears in POST.
If any error messages are displayed, refer to Chapter 3 (1. POST Error Message) in "Maintenance Guide".
•
Important
Pay attention not to make the air duct hit any electronic component on the CPU
blade.
•
Pay attention not to make the air duct hit any electronic component on the CPU
blade.
•
If SSD is installed on air duct, handle the air duct with care not to give any
shock to SSD.
•
Pay attention to orientation of guide key of SSD cable connector.
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices
57