NEC Express5800/B120e-h User Manual page 60

Chapter 2 Preparations
4. Remove a single screw from dummy SSD.
5. Lift the screw hole on dummy SSD, and remove the dummy SSD from SSD bay while tilting the
dummy SSD.
6. Connect SSD cable to SATA connector on Solid State Drive.
60
•
Important Keep the removed dummy SSD for future use.
•
A screw removed from dummy SSD should be used to secure the Solid State
Drive described in next step.
•
Important Pay attention to orientation of connector of SSD cable.
•
SSD cable connector marked as "SSD0" is used for Solid State Drive to be
installed in SSD bay 0, and "SSD1" is for Solid State Drive to be installed in
SSD bay 1.
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices