Removal - NEC Express5800/B120e-h User Manual

Chapter 2 Preparations
4. Mount the support bracket for Trusted Platform Module Kit kit.
Align the positioning key with the groove, and secure it with two screws. (Two types of screws are
provided. Use the flat head screw for Trusted Platform Module Kit side, and the pan head screw for
center side of chassis.)
5. Install the components you removed in earlier steps.
6. Install the CPU blade having been removed to the Blade Enclosure according to the User's Guide of
the Blade Enclosure.
7. Turn on the power of the CPU blade. Make sure that no error message appears in POST.
If any error messages are displayed, refer to Chapter 3(1. POST Error Message) in "Maintenance
Guide".

1.9.2 Removal

To remove the Trusted Platform Module Kit, remove the top cover according to Chapter 2 (1.3.1 Removal of
top cover), and then perform steps 2 through 4 of Chapter 2 (1.9.1 Installation) in reverse order.
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices
71