NEC Express5800/B120e-h User Manual page 61

Chapter 2 Preparations
7. Tilt the Solid State Drive, engage it with a latch on SSD bay, and seat the Solid State Drive in SSD
bay.
8. Fix the Solid State Drive to SSD bay with a screw you have removed from dummy SSD in earlier step.
9. Route the SSD cable so that it is settled in the cable lane of air duct cover.
10. Install the component you have removed in earlier steps.
11. Install the CPU blade having been removed to the Blade Enclosure according to the User's Guide of
the Blade Enclosure.
12. Turn on the power of the CPU blade. Make sure that no error message associated to Solid State Drive
appears in POST.
For details on POST error messages, refer to Chapter 3 (1. POST Error Message) in "Maintenance
Guide".
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices
61