Console - Exerpeutic 1200 Owner's Manual

SPECIFICATIONS:
TIME --------------------------------------- 0:00-99:59 MIN: SEC
SPEED ------------------------------------ 0.0-999.9 ML/H
DISTANCE ------------------------------- 0.0-999.9 ML
CALORIE --------------------------------- 0.0-999.9 KCAL
ODOMETER ----------------------------- 0.0-999.9 ML
PULSE ------------------------------------ 40-240 BEATS/MIN
CONSOLE FUNTIONS:
AUTO ON/OFF: The console will automatically turn on
when exercise is detected. If you leave the console idle for
4 minutes, the power will shut off automatically.
SCAN: Press the button until the screen displays SCAN;
the console will automatically scan the functions of TIME,
ODOMETER, CALORIE, PULSE, SPEED, and DISTANCE,
every 6 seconds.
TIME: Displays your elapsed workout time in minutes and seconds. The console will automatically
count up from 0:00 to 99:59 in one second intervals.
SPEED: Displays your workout speed in miles per hour.
DISTANCE: Displays the total distance traveled during each workout up to a maximum of 999.9
miles.
CALORIE: The console will estimate the cumulative calories burned at any given time during your
workout. The console will count up from 0.0 to 999.9 calories.
ODOMETER: Displays the total accumulative distance traveled during each workout up to a
maximum of 999.9 miles. The data values of the ODOMETER will not be reset to zero when
pressing and holding the button more than 2 seconds. If user takes out the batteries out from the
console, the ODOMETER data values will reset to zero.
PULSE: The console will display your pulse rate in beats per minute after holding both hands on
the handlebar grip sensors during exercise. To ensure the pulse readout is more precise, always
hold on to the handlebar grip sensors with two hands instead of one.
RESET: pressing and holding the button more than 2 seconds will reset all functional values to zero
except for the odometer data values.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of the console.
2. Place two "SIZE-AAA" batteries into the battery housing.
3. Ensure the batteries are correctly positioned and the battery springs are in proper contact with
the batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial legible, remove the batteries and wait 15 seconds before
reinstalling.

CONSOLE

14