Hardware Pack - Exerpeutic 1200 Owner's Manual

ASSEMBLY
TOOL
5mm Allen Wrench with Phillips
Screwdriver
STEP 3
Tip: The Seat Cushion (6) has 2 sets of adjustment holes. It is recommended that users between
5'1" – 5'6" use the holes towards the rear of the seat and users between 5'7" to 6'3" use the holes
towards the front. See Operations & Adjustment Page 18.
3A Installing The Seat Cusion To The Seat Post: Align the bolt holes on the underside of the
Seat Cushion (6) with the holes on top of the Seat Post (5). Attach the Seat Cushion (6) to the
Seat Post (5) with three Flat Washers (33) and three Hexagon Socket Bolts (58). Tighten the
Bolts (58) with the 5mm Allen Wrench with Phillips Screwdriver provided.
3B Installing The Seat Post To The Front Frame: After securing the Seat Cushion (6) to the
Seat Post (5), insert the Seat Post (5) through the Seat Post Plastic Bushing (12) and into the
tube of the Front Frame (2). Insert the Seat Height Adjustment Knob (14) into the threaded hole
on the right side of the Front Frame (2). Turn the Seat Height Adjustment Knob (14) in a
CLOCKWISE direction making sure that the Seat Height Adjustment Knob (14) catches one of
the height adjustment holes on the Seat Post (5) before you start fully tightening the Knob (14).

HARDWARE PACK

(58) Hexagon Socket Bolt
(14) Seat Height (33) Flat Washer
3 PCS 3 PCS
Adjustment Knob
1 PC
12