Exerpeutic 1200 Owner's Manual page 15

Folding upright bike with pulse

Hide thumbs Also See for 1200:

Table of Contents

ASSEMBLY

TOOL

5mm Allen Wrench with Phillips

Screwdriver

STEP 4

4A Connecting The Sensor Wires: Connect the female Sensor Wire (15) from the Rear Frame

(1) to the male wire from the Console (9).

4B Installing The Handlebars: Attach the Handlebar (4) onto the top of the Rear Frame (1) with

four Hexagon Socket Bolts (73) and four Spring Washers (74). Tighten the Bolts (73) with the

5mm Allen Wrench with Phillips Screwdriver provided.

4C Installing The Bottle Holder: Attach the Bottle Holder (62) onto the Rear Frame (1) with two

Screws (66). Tighten the Screws (66) with the 5mm Allen Wrench with Phillips Screwdriver

provided.

HARDWARE PACK

(74) Spring Washer 4PCS

(66) Screw

(73) Hexagon Socket

4 PCS

2PCS

Bolt

2 PCS

4 PCS

Table of Contents

Show Quick Links

Table of Contents