How To Set The Unit - ACME GENESIS COLOR II User Manual

3. How To Set The Unit

3.1 Control Panel
○
1 Display：To show the various menus and the selected functions
LED
○
2 DMX On
○
3 MASTER On
○
On
4 SLAVE
○
5 SOUND Flashing
Button
○
6 MENU To select the programming functions
○
7 DOWN To go backward in the selected functions
○
8 UP To go forward in the selected functions
○
To confirm the selected functions
9 ENTER
○
10 Sensitivity: To adjust the sound receiving sensitivity
○
11 Only for remote control: By connect to the 1/4'' microphone jack to control the unit for
Stand by, Function and Mode function.
○
12 DMXoutput: For DMX512 link, use 3-pin XLR plug cable to link to the next unit.
○
13 DMX input: For DMX512 link, use 3-pin XLR plug cable to input DMX signal.
○
14 Mains input：IEC socket and integrated fuse holder, connect to main power cable.
DMX input present
Master Mode
Slave Mode
Sound activation
5-
4.4 DMX 512 Configuration
4.5 DMX512 Connection
The DMX 512 is widely used in intelligent lighting control, with a maximum of 512 channels.
10-