Advertisement
to the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.
Sound Mode
Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the
(sound off) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
Blackout Mode
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(yes blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
Led Display
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(Led on) or
(Led off) mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Inversion
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or
(inversion) mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Auto Test
Press the MENU button up to when the
is showing on the display. Pressing ENTER button
(sound on) or
is showing on the display. Pressing
is showing on the display. Pressing
is showing on the display. Pressing
is blinking on the display. Pressing
7-
ENTER button and the display will
functions press the MENU button again.
Temperature Test
Press the MENU button up to when the
emperature
button and the display will show the t
press the MENU button again.
Fixture Hours
Press the MENU button up to when the
ENTER button and the display will show the number of working hours of the unit.
To go back to the functions press the MENU button again.
Software version
Press the MENU button up to when the
button and the display will show the version of software of the unit. To go back to the
functions press the MENU button again.
Reset
Press the MENU button up to when the
button and all channels of the unit will return to their standard position. To go back to the
functions without any change press the MENU button again.
4. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address
setting will be effected at once. Every time you turn the unit on, it will show
display and move all the motors to their 'home' position and you may hear some noises for
about 20 seconds. After that the unit will be ready to receive DMX signal or run the built in
programs.
To go back to the
run self-test by built-in program.
is blinking on the display. Pressing ENTER
of the unit. To go back to the functions
is blinking on the display. Pressing
is blinking on the display. Pressing ENTER
is blinking on the display. Pressing ENTER
8-
on the
Advertisement
