Table of Contents
Advertisement
DA-IRIGB-4DIO-PCI104-EMC4 Module
Overview
The DA-IRIGB-4DIO-PCI104-EMC4 module features 3 digital inputs and 4 digital outputs, and provides
precision timing information using IRIG-B input signals. The module is designed for embedded computers that
support the PCI/104 interface. The DA-IRIGB-4DIO-PCI104-EMC4 module includes two DB9 connectors for
IRIG-B input signals and DIOs in embedded computers.
The DA-IRIGB-4DIO-PCI104-EMC4 module includes jumpers that enable you to configure the I/O base address
and the INT vector for each port. In addition, the built-in EMC level 4 protection safeguards the module
connected to the IRIG-B input signals and digital input and digital output devices.
Package Checklist
MOXA performs a careful mechanical and electrical inspection of each module prior to shipping. Your module
should arrive in perfect electrical order, free of any marks or scratches. Please handle the module by the edges
only, since your body's static charge can damage the integrated circuits. When the module is not in use, keep
it in the anti-static package provided. You may also use this package to return the module if it requires repair.
The DA-IRIGB-4DIO-PCI104-EMC4 module is shipped with the following items:
•
DA-IRIGB-4DIO-PCI104-EMC4 module
•
2 DB9 connectors
•
4 15 mm M/F M3x6/M3x7 spacers
•
4 4.8 mm M/F 4-40x7/4-40x4.75 spacers
•
4 screws
•
Quick installation guide (printed)
•
Warranty card
NOTE
Please notify your sales representative if any of the above items are missing or damaged.
Product Features
The DA-IRIGB-4DIO-PCI104-EMC4 module features the following:
•
1 IRIG-B signal input port to support S/W controlled TTL/differential signal input
•
3 digital inputs, 4 digital outputs
•
Built-in EMC level 4 protection
•
Configurable IRQ and I/O settings
•
Onboard status LED indicators for IRIG-B signal input
Product Specifications
Hardware
Communication Controller: FPGA Cyclone IV @ 25 MHz
Bus: PCI/104
Connectors: 2-pin wafer, 10-pin wafer
Jumper: PCI resource
Interface
Connector: DB9 male
Protection
ESD Protection: 8 kV contact, 15 kV Air ESD protection
1-2
Introduction
Advertisement
Table of Contents
