Configuring Digital Output And Input Status - Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 User Manual

DA-IRIGB-4DIO-PCI104-EMC4 Module

Configuring Digital Output and Input Status

The DA-IRIGB-4DIO-PCI104-EMC4 module features four digital outputs and three digital inputs. You can use
IRIG-B utility configure the digital output and digital input status.
To control a digital output, select or clear the associated check box. The following table shows the signal and
logic state for the check box.
Check box
Selected
Not selected
To read status from a digital input, select or clear the associated check box. The following table shows the
signal and logic state.
Check box
Selected
Not selected
Signal Logic
High 1
Low 0
Signal Logic
High 1
Low 0
4-19
Software Installation and Configuration