DA-IRIGB-4DIO-PCI104-EMC4 Module
Installing the DA-IRIGB-4DIO-PCI104-EMC4
ATTENTION
To prevent damage to your system or the main board, make sure that you turn off the embedded computer
before installing the DA-IRIGB-4DIO-PCI104-EMC4 module.
1. Turn off the embedded computer.
2. Connect the cables. Complete the following actions:
a. Connect the 2-wire IRIG-B input signal cable.
b. Connect the 4-wire IRIG-B output signal cable.
4-3
Hardware Installation