Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 User Manual page 19

DA-IRIGB-4DIO-PCI104-EMC4 Module
2:Set IRIG-B RTC Time
-p [2000-2099],[1-12],[1-31],[0-23],[0-59],[0-59]
(year[2000-2099],month[1-12],day[1-31],hour[0-23],min[0-59],sec[0-59]); default
value is 2014,01,01,00,00,00
3:Get IRIG-B RTC Sync. Source
4:Set IRIG-B RTC Sync. Source
-p [0-2] (Source: 0=FreeRun In (Internal RTC), 1=Fiber In, 2=Port 1 In);
default value is 2
5:Get IRIG-B Signal Status
-p [1-2] (Source: 1=Fiber In, 2=Port 1 In); default value is 2
6:Get IRIG-B Input Parity Check Mode
-p Source[1-2] (1=Fiber In, 2=Port 1 In); default value is 2
7:Set IRIG-B Input Parity Check Mode
-p Source[1-2] (1=Fiber In, 2=Port 1 In),Mode[0-2] (0=Even, 1=Odd, 2=None);
default value is 2,0
8:Get IRIG-B Output Parity Check Mode
9:Set IRIG-B Output Parity Check Mode
-p Mode[0-1] (0=Even, 1=Odd); default value is 0
10:Get Pulse per second width(ms)
11:Set Pulse per second width(ms)
-p [0-999] (width: 0-999 ms); default value is 0
12:Get input signal type
-p [0-1] 0=Fiber, 1=Port 1 (port[0-1]); default value is 1
13:Set input signal type
-p [0-1],[0-1],[0-1]
14:Get output signal type
-p [1-4] (output port[1-4]); default value is 1
15:Set output signal type
-p [1-4],[0-1],[0-3],[0-1]
16:Get Digital Output
-p [0-3] (digital output port[0-3]); default value is 0
17:Set Digital Output
-p [0-3],[0-1] (digital output port[0-3],level[0-1]); default value is 0,0
18:Get Digital Input
-p [0-2] (digital input port[0-2]); default value is 0
(port[0-1]: 0=Fiber 1=Port 1,
signal type[0-1]: 0=TTL, 1=DIFF,
inverse[0-1]: 0=No inverse 1=Inverse)
default value is 1,1,0
(output port[1-4]: Output port 1-4,
signal type[0-1]: 0=TTL, 1=DIFF,
mode[0-3]: 0=From Fiber Input Port, 1=From Port 1 Input, 2=From
IRIG-B encode(Internal RTC), 3=From PPS encode;
inverse[0-1]: 0=No inverse, 1=Inverse)
default value is 1,1,2,0
4-6
Software Installation and Configuration