Table of Contents
Advertisement
DA-IRIGB-4DIO-PCI104-EMC4 Module
Function ID
18
NOTE
Function IDs 8, 9, 14, and 15 are not available for the DA-IRGB-4DIO-PCI-104-EMC4 module, which does not
support the fiber input port.
Examples
The following command example displays the IRIG-B module hardware ID.
root@Moxa:~# mxIrigUtil -f 0
Get Hardware ID = 1 (DA_IRIGB_4DIO_PCI104)
The following command example displays the IRIG-B module internal RTC time.
root@Moxa:~# mxIrigUtil -f 1
Get IRIGB RTC = 2011/11/11 17:29:55.204137520, TZ = +8, TQ = 6
The following command example sets the IRIG-B module internal RTC time to 2014/11/19 11:19:50.
root@Moxa:~# mxIrigUtil -f 2 -p 2014,11,19,11,19,50
Set IRIGB RTC = 2014/11/19 11:19:50
The following command example displays the IRIG-B module time sync source setting. In this example, the
time source is IRIG-B Port 1.
root@Moxa:~# mxIrigUtil -f 3
Get Sync. Source = 2 (Port 1 In)
The following command example sets the IRIG-B module time sync source.
root@Moxa:~# mxIrigUtil -f 4 -p 1
Set Sync. Source = 1
The following command displays the IRIG-B signal status.
root@Moxa:~# mxIrigUtil -f 5 -p 1
Fiber In Signal Status = 1(Off Line)
root@Moxa:~# mxIrigUtil -f 5 -p 2
Port 1 In Signal Status = 2(Frame Error)
root@Moxa:~
The following command displays the pulse per second width (ms).
root@Moxa:~# mxIrigUtil -f 10
Get PPS Width = 0 ms
The following command example sets the pulse per second width (ms).
root@Moxa:~# mxIrigUtil -f 11 -p 5
Set PPS Width = 5 ms
The following command example displays the input interface.
root@Moxa:~# mxIrigUtil -f 12 -p 1
Get Input Port 1 Interface = 1(DIFFERENTIAL), Inverse = 0
Function description
Display digital input.
Software Installation and Configuration
Parameters
port
Where 0 is "DI0", 1 is "DI1", and 2 is "DI2"
4-8
Advertisement
Table of Contents
