Configuring Irig-B Parameters; Input Signal Type - Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 User Manual

DA-IRIGB-4DIO-PCI104-EMC4 Module

Configuring IRIG-B Parameters

You can use the IRIG-B utility to configure the IRIG-B parameters that the DA-IRIGB-4DIO-PCI104-EMC4
module supports.

Input Signal Type

In the Moxa IRIG-B Card Configure Utility screen, select Differential or TTL from the Signal Type drop-down
list. Click Apply to make the changes take effect.
Software Installation and Configuration
4-16