Troubleshoot Ih Browser Error Messages; Troubleshoot Missing Radios - ProSoft Technology RadioLinx RLX2-IHW User Manual

While holding the reset button in with a paperclip, attach power to the radio, and
4
continue to hold down the reset button for 30 seconds.
5 The radio will be reset to its default settings, including the password. The user
should now be able to log in using the default password, which is password.

Troubleshoot IH Browser Error messages

One error message commonly occurs when using the IH Browser, "Unable to scan for
AP's".
This error occurs when the IH Browser attempts to scan for radios and no valid network
connection exists on the PC, wired or wireless.
To correct this error, Confirm the PC has at least one active network (LAN) connection.
It could be a wired Ethernet connection or a wireless 802.11 connection.
Confirm the network connection has a valid IP address. The network connection might
need to have a static IP address assigned to it. Check the IP address of the network
connection to determine that one has been assigned.

Troubleshoot Missing Radios

If radios are not visible in the IH Browser, try the following:

First, click the S
be dropped in RF connections, requiring the user to scan again.

Second, disable any software firewall running on the PC (This is most common in
Windows XP and newer). Open the N
Control Panel, then open the L
that the check box under I
ProSoft Technology, Inc.
June 15, 2015
button again. Scans are sent as broadcast messages, which can
CAN
ETWORK CONNECTIONS
A
OCAL REA
C
NTERNET ONNECTION
folder in the Windows
C P
ONNECTION ROPERTIES
F is not checked.
IREWALL
RLX2 Industrial Hotspot Series
window and verify
Page 65 of 212