Section 4 – Troubleshooting
System Log
Choose MAINTAINANCE > System Log. The System Log page shown in the
right figure appears.
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the system
log function.
To log the events, take the following steps.
Step 1
Select Settings check box to configure log level.
Step 2
Click Apply Changes to apply the settings.
Step 3
Check Remote Log Enable and configure remote systlog server IP
address to enable remote log.
Step 4
Click Apply Changes to apply the settings.
Logout
Choose MANAGEMENT > Logout. The page shown in the right figure appears.
In this page, you can log out of the configuration page.
In the main interface, click Status tab to enter the Status menu. The submenus are Device Info, Wireless Clients, DHCP clients, ADSL Driver,
Statistics, Route Info . You can view the system information and monitor performance.
In the main interface, click Help tab to enter the Help menu. This section provides detailed configuration information for the device. Click a wanted
link to view corresponding information.
D-Link DSL-2740E User Manual
Status
Help
50