Section 4 – Troubleshooting
ATM
Choose SETUP > Internet Setup > ATM settings. The page shown in the right
figure appears.
In this page, it is recommended to keep it as defaults. The device negotiates the
modulation mode with DSLAM.
Click Apply to save the settings.
ADSL
Choose SETUP > Internet Setup > ADSL settings. The page shown in the right
figure appears.
This page is used to configure the parameters for the ATM of your ADSL Router.
Here you may change the setting for VPI, VCI, QoS etc ...
D-Link DSL-2740E User Manual
24