Page 1
DSL-260I ADSL USB Modem User’s Guide First Edition Revision 01 (July 2002) Printed In Taiwan RECYCLABLE...
Page 2
DSL-260I ADSL USB Modem User’s Guide Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger.
Page 3
The one-year period of warranty on complete products applies on condition that the product's Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase. A list of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. Failing such timely registration of purchase, the warranty period shall be limited to 90 days.
Page 4
D-Link Offices for Registration and Warranty Service The product's Registration Card, provided at the back of this manual, must be sent to a D-Link office. To obtain an RMA number for warranty service as to a hardware product, or to obtain warranty service as to a software product, contact the D-Link office nearest you.
Page 5
No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976 FCC Warning This device complies with part 15 of the FCC Rules.
Table of Contents BEFORE YOU START ........................... VII ....................PERATING YSTEM AND THER EQUIREMENTS USB Port ..................................vii ADSL Service .................................vii Network Protocol and the Software Driver........................vii Encapsulation Method ..............................viii Modulation Technique ..............................viii INTRODUCTION ............................1 ADSL? ..............................1 HAT IS ........................
Page 7
DSL-260I ADSL USB Modem User’s Guide Gateway Address ................................26 DNS Server Address ............................... 26 Configure Modem with LAN Driver for Windows 98, 98SE, ME ................. 27 Configure Modem with LAN Driver for Windows 2000....................29 Configure Modem with LAN Driver for Windows XP....................29 MONITORING THE MODEM ........................
Modem. In order to avoid problems please read this section and make sure you understand all the prerequisites for proper installation of your new Modem. Operating System and Other Requirements The D-Link DSL-260I can be used with PCs running Microsoft® Windows 98, Windows 98 Second Edition, Windows 2000, Windows Millennium Edition (ME) or Windows XP. USB Port In addition to the Windows OS, you will need an available USB (Universal Serial Bus) port, compliant with the USB 1.1 specification, on your computer.
DSL-260I ADSL USB Modem User’s Guide The drivers are fundamentally different in the way they relate to operating system of the computer. The computer/Modem relationship can be summarized as follows: LAN driver – To your computer, the Modem appears as an Ethernet device. Connection is automatic, similar to a connection to an Ethernet device.
Page 10
DSL-260I ADSL USB Modem User’s Guide Use the tables provided here to record the information you need to install the Modem. SETTINGS TABLE (all users) Software Driver: The driver used depends on the connection protocol used for your network services.
Modem Description and Operation The DSL-260I ADSL USB Modem is easy to install and use. Please note that you must first install the software driver for the device by following the instructions in Chapter 3. Once the driver has been installed you can connect the Modem to your computer.
DSL-260I ADSL USB Modem User’s Guide Product Features The D-Link DSL-260I Modem provides the following features: G.hs compliant (Auto-handshake) G.dmt full rate compliant G.lite compliant RFC 1483 Bridged Ethernet compliant RFC 1483 IP over ATM compliant RFC 2364 PPP over ATM compliant RFC 2516 PPP over Ethernet compliant Compatible with all T1.413 issue 2 (full rate DMT over analog POTS), and CO DSLAM equipment...
DSL-260I ADSL USB Modem User’s Guide Front Panel LED Indicators There are two LED indicators on the Modem: ♦ Power - Indicates the Modem is powered on when lit. ♦ ADSL Link – Indicates a valid ADSL link has been established when lit.
DSL-260I ADSL USB Modem User’s Guide ODEM NSTALLATION Before you connect the USB cable, you must install the driver. See the next chapter for driver installation instructions. The only cable you should connect initially is the ADSL cable. Place the Modem in a location so that you are able to view the LEDs. It should be placed in an area that is clean, dry and ventilated.
DSL-260I ADSL USB Modem User’s Guide OFTWARE NSTALLATION The DSL-260I can be used with the following operating systems: ♦ Microsoft Windows 98 ♦ Microsoft Windows 98 Second Edition ♦ Microsoft Windows 2000 ♦ Microsoft Windows Millennium Edition ♦ Microsoft Windows XP The procedure for each operating system is slightly different.
The installation requires two distinct steps. First, the correct driver is installed and your PC restarted. Once your PC has restarted, you connect the DSL-260I modem to your USB port. Your PC will recognize the modem and load the appropriate software into your system. You can then configure the software to the appropriate settings for your ADSL service provider.
CABLE. Windows 98, 98SE, ME, 2000 (LAN Driver) 1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation program and run the program automatically. If installation does not begin automatically after a few seconds, find the start.exe icon located on the CD and double-click this. To view the contents of the CD, open My Computer from the desktop, and right-click on your CD-ROM.
Page 19
DSL-260I ADSL USB Modem User’s Guide 4. The Welcome window appears. Click "Next" to copy the driver files. If you have yet done so, exit all other programs before you install driver. 5. In the "InstallShield Wizard Complete" window, click “Next”. Your system will be restarted.
Click OK. Windows XP (LAN Driver) 1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation program and run the program automatically. If installation does not begin automatically after a few seconds, find the start.exe icon located on the CD and double-click this.
Page 21
DSL-260I ADSL USB Modem User’s Guide 3. The "Driver Type Selection" window appears. Click the "LAN" button. 4. The Welcome window appears. Click "Next" to copy the driver files. If you have yet done so, exit all other programs before you install driver.
Page 22
DSL-260I ADSL USB Modem User’s Guide 6. After your system has restarted, the "DSLMON Warning" appears. Complete the USB cable the computer-to-modem connection and click “OK”. 7. After the installation is finished, the "ADSL USB" window appears and informs you the installation...
2000 operating systems. The second is for Windows XP. Follow the procedure for your system. Windows 98, 98SE, ME, 2000 (PPPoA Driver) 1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation program and run the program automatically. If installation does not begin automatically after a few seconds, find the start.exe icon located on the CD and double-click this.
Page 24
DSL-260I ADSL USB Modem User’s Guide 5. In the "InstallShield Wizard Complete" window, click “Next”. Your system will be restarted. 6. After your system has restarted, the "DSLMON Warning" appears. Complete the USB cable the computer-to-modem connection and click “OK”.
DSL-260I ADSL USB Modem User’s Guide Windows XP (PPPoA Driver) 1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation program and run the program automatically. If installation does not begin automatically after a few seconds, find the start.exe icon located on the CD and double-click this.
Page 26
DSL-260I ADSL USB Modem User’s Guide 5. In the "InstallShield Wizard Complete" window, click “Next”. Your system will be restarted. 6. After your system has restarted, the "DSLMON Warning" appears. Complete the USB cable the computer-to-modem connection and click “OK”.
2000 operating systems. The second is for Windows XP. Follow the procedure for your system. Windows 98, 98SE, ME, 2000 (PPPoE Driver) 1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation program and run the program automatically. If installation does not begin automatically after a few seconds, find the start.exe icon located on the CD and double-click this.
Page 28
DSL-260I ADSL USB Modem User’s Guide 4. The Welcome window appears. Click "Next" to copy the driver files. If you have yet done so, exit all other programs before you install driver. 5. In the "InstallShield Wizard Complete" window, click “Next”. Your system will be restarted.
Click OK. Windows XP (PPPoE Driver) 1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation program and run the program automatically. If installation does not begin automatically after a few seconds, find the start.exe icon located on the CD and double-click this.
Page 30
DSL-260I ADSL USB Modem User’s Guide 4. The Welcome window appears. Click "Next" to copy the driver files. If you have yet done so, exit all other programs before you install driver. 5. In the "InstallShield Wizard Complete" window, click “Next”. Your system will be restarted.
DSL-260I ADSL USB Modem User’s Guide ONNECTING TO THE NTERNET Now that the driver software has been installed, you are ready to establish a connection to the Internet. The connection from your computer to the Internet is actually an indirect connection. You must first get connected to the computers that control the connection to the larger network or Internet.
DSL-260I ADSL USB Modem User’s Guide 3. Once your account information is verified, the computers will complete the connection to the network. This process or “negotiation” can take a few seconds to complete. When the negotiation process is finished a “Connection Established” dialog box will appear to confirm that you have successfully connected to the network.
DSL-260I ADSL USB Modem User’s Guide 2. The "Connect to" dialog box appears. Type in the User name and Password given to you by your ADSL service provider or ISP. Computers on the ISP’s network use this information to confirm the identity of your account.
Page 34
DSL-260I ADSL USB Modem User’s Guide 2. The "Connect to" dialog box appears. Type in the User name and Password given to you by your ADSL service provider or ISP. Computers on the ISP’s network use this information to confirm the identity of your account.
DSL-260I ADSL USB Modem User’s Guide Windows XP (PPPoA and PPPoE driver) 1. Double-click the icon "Shortcut to USB_ADSL" on the Desktop. 2. The "Connect to" dialog box appears. Type in the User name and Password given to you by your ADSL service provider or ISP.
DSL-260I ADSL USB Modem User’s Guide * If a dialog box appears titled “Network Protocol Connection Result”, click the “Accept” to connect. If you want to avoid this step in the future you will need to disable the IPX/SPX protocol. To disable NetBEUI &...
DSL-260I ADSL USB Modem User’s Guide of IP address you entered above. Gateway Address This is the IP address of a network device where packets with a destination address outside the current subnet should be sent. This is usually the address of a router or a host acting as an IP gateway. If your network is not part of an intranet, or you do not want the Switch to be accessible outside your local network, you can leave this field unchanged.
DSL-260I ADSL USB Modem User’s Guide Configure Modem with LAN Driver for Windows 98, 98SE, ME 1. From the Start menu, select Settings, open Control Panel, and double-click on the Network icon. 2. The Network window appears. Select the Configuration tab, scroll down the installed network components list and click on TCP/IP->USB ADSL LAN Adapter.
Page 39
DSL-260I ADSL USB Modem User’s Guide 5. Select Gateway tab and enter the IP settings in the New gateway field. Click Add. 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field.
DSL-260I ADSL USB Modem User’s Guide Configure Modem with LAN Driver for Windows 2000 1. Double-click on the My Computer icon, the Control Panel icon, and then the Network and Dial-up Connections icon. 2. The Network and Dial-up Connections window appears. Right click on the Local Area Connection for the USB ADSL LAN Adapter.
System Tray (usually at the bottom-right corner of screen - on the Task Bar). This will open the DSLMON utility to aid you in tracking the activity and status of your DSL-260I ADSL USB modem. Clicking on the icon will bring up the following window: The bright green triangle to the right of “DSL Status”...
Page 42
DSL-260I ADSL USB Modem User’s Guide The icon in your System Tray is yellow while the ADSL link is initializing. A yellow triangle and the word “INITIALIZING” also appears on the DSLMON utility. This indicates that your modem is in the process of establishing the ADSL link.
D-Link DSL-260I USB ADSL Modem. Uninstall for Windows 98, 98SE, ME, 2000 1. From the Start Menu go to Programs D-Link DSL-260I USB ADSL Modem Uninstall 2. The "Confirm File Deletion" dialog box appears. Click OK to uninstall the Modem driver.
Page 44
DSL-260I ADSL USB Modem User’s Guide 3. The "Maintenance Complete" window will appear, click Finish to restart your computer. 4. Then, the "Severe" warning dialog box appears. Disconnect the Modem to prevent the New Hardware Found wizard from starting when your computer reboots and click OK. Your system will...
DSL-260I ADSL USB Modem User’s Guide Uninstall for Windows XP 1. From the Start Menu go to All Programs D-Link DSL-260I USB ADSL Modem Uninstall 2. The "Confirm File Deletion" dialog box appears. Click OK to uninstall the Modem driver.
Page 46
DSL-260I ADSL USB Modem User’s Guide 3. The "Maintenance Complete" window will appear, click Finish to restart your computer. 4. Then, the "Severe" warning dialog box appears. Disconnect the Modem to prevent the New Hardware Found wizard from starting when your computer reboots and click OK. Your system will be restarted.
DSL-260I ADSL USB Modem User’s Guide ECHNICAL PECIFICATIONS General ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) Standards: ITU G.992.2 (G.lite) ITU G.994.1 (G.hs) USB 1.1 specifications RFC 2364 PPP over ATM Adaptation Layer 5 RFC 2516 PPP over Ethernet Protocol: RFC 1483 Multiprotocol Encapsulation over ATM Adaptation Layer 5 G.dmt full rate downstream: up to 8Mbps...
Page 48
TEL: 39-02-2900-0676 FAX: 39-02-2900-1723 URL: www.dlink.it E-MAIL: info@dlink.it Japan D-Link Japan 10F, 8-8-15 Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan TEL: 81-3-5434-9678 FAX: 81-3-5434-9868 URL: www.d-link.co.jp E-MAIL: kida@d-link.co.jp Netherlands D-Link Benelux Fellenoord 1305611 ZB, Eindhoven, the Netherlands TEL: 31-40-2668713 FAX: 31-40-2668666 URL: www.d-link-benelux.nl...
Page 49
South Africa D-Link South Africa 102 – 106 Witchhazel Avenue, Einstein Park 2, Block B, Highveld Technopark, Centurion, South Africa TEL: 27 (0) 12-665-2165 FAX: 27 (0) 12-665-2186 URL: www.d-link.co.za E-MAIL: attie@d-link.co.za Spain D-Link Spain Gran Via de Carlos III, 843º Edificio Trade, 08028 Barcelona, Spain TEL: 34 93 4965751 FAX: 34 93 4965701 URL: www.dlinkiberia.es...
Page 50
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chainstore/Wholesale Government Transportation/Utilities/Communication System house/company Other____________________________________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? _____________________________________________________________________ _____________________________________________________________________________________________________ _____________________________________________________________________________________________________...