Section 4 – Troubleshooting
Firmware Upgrade
Choose MAINTAINANCE > Firmware Update. The page shown in the right
figure appears. In this page, you can upgrade the firmware of the device.
To update the firmware, take the following steps.
Click Browse...to find the file.
Step 1
Step 2
Click Update Firmware to copy the file.
The device loads the file and reboots automatically.
Note:
Do not turn off your device or press the Reset button while an operation in
this page is in progress.
Password
Choose MAINTAINANCE > Password. The page shown in the right figure
appears. In this page, you can change the password of the user and set time for
automatic logout.
You should change the default password to secure your network. Ensure that
you remember the new password or write it down and keep it in a safe and
separate location for future reference. If you forget the password, you need to
reset the device to the factory default settings and all configuration settings of the
device are lost.
Enter the current and new passwords and confirm the new password to change
the password. Click Add or Modify to apply the settings.
D-Link DSL-2740E User Manual
47