Download Print this page

D-Link DSL-200 - 8 Mbps DSL Modem User Manual

User guide
Hide thumbs

Advertisement

Quick Links

DSL-200 ADSL USB Modem
User's Guide
( Mar. 2004)
651AU2000055
Printed In China
RECYCLABLE

Advertisement

loading

  Related Manuals for D-Link DSL-200 - 8 Mbps DSL Modem

  Summary of Contents for D-Link DSL-200 - 8 Mbps DSL Modem

  • Page 1 DSL-200 ADSL USB Modem User’s Guide ( Mar. 2004) 651AU2000055 Printed In China RECYCLABLE...
  • Page 2 DSL-200 ADSL USB Modem User’s Guide Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfä ltig durch. 2. Heben Sie diese Anleitung für den spä tern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerä t vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger.
  • Page 3: Limited Warranty

    Warranty service for software products may be obtained by contacting a D-Link office within the applicable warranty period. A list of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. If a Registration Card for the product in question has not been returned to a D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting warranty service.
  • Page 4: Limitation Of Liability

    D-Link makes no warranty that its software products will work in combination with any hardware, or any application or system/platform software product provided by any third party, excepting only such products as are expressly represented, in D-Link's applicable product documentation as being compatible.
  • Page 5 No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976 FCC Warning This device complies with part 15 of the FCC Rules.
  • Page 6: Table Of Contents

    Table of Contents ’ ........................... 6 VERVIEW OF THE UIDE .............................. 7 PERATING YSTEMS ü USB Port..............................7 ..........................7 ICROFILTERS AND PLITTERS Microfilters ................................. 8 Line Splitter ................................ 8 ADSL Service..............................8 ADSL Service..............................9 Network Protocol and the Software Driver ......................9 Encapsulation Method............................
  • Page 7: Overview Of The User ' S

    About This User’s Guide This user’s guide tells you how to install your DSL-200 ADSL USB Modem and use it to connect to the Internet. ADSL services are provided by, and sold by a variety of businesses. Your ADSL service provider may be your telephone company, an Internet service provider (ISP), a business that specializes in providing network services or a combination of any of these.
  • Page 8: Operating Systems

    Modem. Operating Systems The D-Link DSL-200 can be used with PCs running Microsoft® Windows 98, Windows 98 Second Edition, Windows 2000, Windows Millennium Edition or Windows XP. ü USB Port In addition to the Windows OS, you will need a USB (Universal Serial Bus) type B port on your computer.
  • Page 9: Microfilters

    Microfilters Unless you are instructed to use a “line splitter” (see below), it will be necessary to install a microfilter (low pass filter) device for each telephone telephone device (answering machines, Faxes etc.) that share the line with ADSL service. Microfilters are easy-to-install, in- line devices, which attach to the telephone...
  • Page 10: Adsl Service

    ADSL Service In order to use the Modem you must first have ADSL service established with a DSL service provider. There are four standards used for ADSL connections known as ANSI T1.413 issue 2, G.Lite, G.dmt and G.hs. The standards differ somewhat as to data transfer speed or bit rate. For user convenience, the Modem supports the G.hs Auto-handshake ADSL standard.
  • Page 11 Use the tables provided here to record the information you need to install the Modem. SETTINGS TABLE (all users) VPI: VCI: Software Driver: The driver used depends on the connection protocol used for your network services. Ø Select the WAN driver if your connection is a PPP connection. That is if you are using RFC 2364 PPP over ATM or RFC 2516 PPPoE PPP over Ethernet.
  • Page 12: Introduction

    ADSL modem technology is a relatively new technology and may be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its key attributes. We also give a general description of the D-Link DSL-200 USB Modem and its main features.
  • Page 13: Product Features

    Product Features The D-Link DSL-200 Modem provides the following features: Ø G.hs compliant (Auto-handshake) Ø G.dmt full rate compliant Ø G.lite compliant Ø RFC 2684 (Bridged Ethernet) compliant Ø RFC 2364 PPP over ATM compliant Ø RFC 2516 PPP over Ethernet compliant Ø...
  • Page 14: Front Panel

    Front Panel LED Indicators There are two LED indicators on the Modem: Power - Indicates the Modem is powered on when lit. ADSL Link – Indicates a valid ADSL link has been established when lit.
  • Page 15: Modem Installation

    ODEM NSTALLATION Before you connect the USB cable, you must install the driver. See the next chapter for driver installation instructions. The only cable you should connect initially is the ADSL cable. Place the Modem in a location so that you are able to view the LEDs. It should be placed in an area that is clean, dry and ventilated.
  • Page 16: Software Installation

    OFTWARE NSTALLATION The DSL-200 can be used with the following operating systems: Microsoft Windows 98 Microsoft Windows 98 Second Edition Microsoft Windows 2000 Microsoft Windows Millennium Edition Microsoft Windows XP The procedures for each system are slightly different so be sure to follow the instructions provided for your PC’s operating system.
  • Page 17: Install The Software Driver

    Install the Software Driver Install the software driver on a computer using the Windows 98, Windows 98 Second Edition, Windows 2000 or Windows Millennium Edition (Windows Me) operating system. There are two different drivers, the LAN (Local Area Network) or WAN (Wide Area Network) driver.
  • Page 18 3. The Welcome window will appear. Make sure you have quit all other programs and click Next. 4. In the Select Service Provider window, select “ Other Service Provider” and click Next.
  • Page 19 5. In the Select Driver Type window, choose the driver that best suits your ADSL connection, and then click Next. 6. In the Communication Settings window you must provide the PVC settings, Encapsulation method and Modulation method for configuring the Modem. Type in the VPI and VCI values in their respective fields.
  • Page 20 7. In the same window, select the appropriate Encapsulation method from the drop-down menu. You will select the encapsulation setting that is appropriate for the driver you are installing. Note: At this point you must choose the Encapsulation method and Modulation technique used for your ADSL connection.
  • Page 21 9. The Ready To Install window appears. Click Next to copy the needed driver files. 10. After clicking Next, the Installing screen below will appear notifying you that your computer is downloading files and preparing for installation.
  • Page 22 11. After the files are downloaded, another Installing screen will prompt you to plug your modem into your computer. Plug the rectangular end of the USB cable into the USB port of your PC, and then plug the square end of the USB cable into the USB port of the ADSL Modem.
  • Page 23 Upon restarting your computer, a new icon (two arrows) will appear in the System Tray. If you are using PPP (WAN driver only) the D-Link PPP Connection icon will appear on your desktop after restarting.
  • Page 24: Verify The Adsl Connection

    Verify the ADSL Connection Before you continue to the final step, make sure that the ADSL connection has been established. This can be done easily using the Modem’s ADSL connection monitoring feature described below. Desktop Monitoring A new icon will appear in the System Tray of your desktop. These colored arrows will help you monitor the status of your ADSL connection.
  • Page 25: Connect To The Internet

    ONNECT TO THE NTERNET Now that the driver has been installed, you are ready to connect to the Internet. You establish an Internet connection indirectly, using DSL link to your network service provider. Follow the instructions for the driver you have installed and the operating system you use on your computer.
  • Page 26 1. From the Windows desktop double-click on the D-Link PPP Connection icon. In the Connect To window type in the correct User name and Password given to you by your ADSL or network service provider. Check the Save password box if do not want to retype the password if you need to reconnect.
  • Page 27: Connect To Internet - Lan Driver Users

    1. From the Start menu, select Settings, Control Panel, and then double-click on the Network icon. 2. The Network window appears. Select the Configuration tab, scroll down the installed network components list and click on TCP/IPà D-Link DSL-200 USB ADSL Modem 3. Click the Properties button.
  • Page 28: Windows 2000 Or Windows Xp (Lan Driver)

    Network and Dial-up Connections icon. 2. The Network and Dial-up Connections window appears. Right click on the Local Area Connection for the D-Link DSL-200 USB ADSL Modem. 3. The Local Area Connection window appears. Click on Internet Protocol (TCP/IP), then click on Properties.
  • Page 29: Monitoring The Modem

    ONITORING THE ODEM Once you have installed the Modem you can monitor the status of the ADSL connection by clicking on the connection icon in your System Tray or click on the DSL-200 icon in the Control Panel folder. Clicking on either icon will bring up the following window: The bright green light under the screen indicates a valid link.
  • Page 30 Under the screen to the left are two scroll buttons . Clicking on the right scroll button will bring up the screen pictured above, showing the Current Driver and Control Panel versions. Clicking on the left scroll button will return you to the initial screen.
  • Page 31: Changing Modem Configuration

    HANGING ODEM ONFIGURATION Once the Modem and software have been installed the communication settings may be easily updated by performing the following steps: 1. From your PC desktop click Start – Programs – -Link DSL-200 ADSL Modem – Configure. A notification message will appear indicating that the setup process has begun.
  • Page 32 The “ Communication Settings” window will be displayed. Make the necessary changes to the VPI, VCI, Encapsulation type and/or Modulation type and click Next. The new settings will be applied after restarting the computer. If you want to restart now click Close.
  • Page 33: Uninstalling The Modem

    NINSTALLING THE ODEM If you need to uninstall the Modem, use the Uninstall program available in the DSL-200 Modem folder. Failure to use the Uninstall program can leave files in the system that can cause problems with future installations, including problems with reinstallation of the Modem. IMPORTANT: Do not remove the Modem using the device manager.
  • Page 34 2. You are asked to confirm your intention to remove the device (software). Click Yes to uninstall the Modem. 3. A new window appears and asks that you not unplug the USB cable until after the device driver has been completely removed. Click OK to proceed. 4.
  • Page 35 5. The final window informs you that the uninstall process will be completed after rebooting your computer. Click Close to reboot your computer and complete the uninstallation process.
  • Page 36: Technical Specifications

    ECHNICAL PECIFICATIONS General ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) Standards: ITU G.992.2 (G.lite) ITU G.994.1 (G.hs) USB 1.1 specifications RFC 2364 PPP over ATM Adaptation Layer 5 Protocol: RFC 2516 PPP over Ethernet RFC 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 G.dmt full rate downstream: up to 8Mbps G.dmt full rate upstream: up to 640Kbps Data Transfer Rate:...
  • Page 37 TEL: 39-02-2900-0676 FAX: 39-02-2900-1723 URL: www.dlink.it E-MAIL: info@dlink.it Japan D-Link Japan 10F, 8-8-15 Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan TEL: 81-3-5434-9678 FAX: 81-3-5434-9868 URL: www.d-link.co.jp E-MAIL: kida@d-link.co.jp Netherlands D-Link Benelux Fellenoord 1305611 ZB, Eindhoven, the Netherlands TEL: 31-40-2668713 FAX: 31-40-2668666 URL: www.d-link-benelux.nl...
  • Page 38 South Africa D-Link South Africa 102 – 106 Witchhazel Avenue, Einstein Park 2, Block B, Highveld Technopark, Centurion, South Africa TEL: 27 (0) 12-665-2165 FAX: 27 (0) 12-665-2186 URL: www.d-link.co.za E-MAIL: attie@d-link.co.za Spain D-Link Spain Gran Via de Carlos III, 843º Edificio Trade, 08028 Barcelona, Spain TEL: 34 93 4965751 FAX: 34 93 4965701 URL: www.dlinkiberia.es...
  • Page 40: Registration Card

    8. What category best describes your company? oAerospace oEngineering oEducation oFinance oHospital oLegal oInsurance/Real Estate oManufacturing oRetail/Chainstore/Wholesale oGovernment oTransportation/Utilities/Communication oVAR oSystem house/company oOther____________________________________________________________ 9. Would you recommend your D-Link product to a friend? oYes oNo oDon't know yet 10.Your comments on this product? _________________________________________________ _________________________________________________________________________________ _________________________________________________________________________________...

This manual is also suitable for:

Dsl-200