Maintainance; System - D-Link DSL-2740E User Manual

Section 4 – Troubleshooting
In the main interface, click MAINTAINANCE tab to enter the maintenance menu. The submenu of the Management contains System, Firmware
Upgrade, Password , Diagnosis, system Log Configuration and Logout.

System

Choose MAINTAINANCE > System. The page shown in the right figure
appears.
In this page, you can reboot device, back up the current settings to a file, update
settings from the file saved previously and restore the factory defaults.
The buttons in this page are described as follows:
Field
Restore to Default
Setting
Save and Reboot
Backup Setting
Update settings
Note:
Do not turn off your device or press the Reset button while an operation in
this page is in progress.
D-Link DSL-2740E User Manual
Description
Click this button to reset the device to default
settings.
Click this button to reboot the device.
Click this button to save the settings to the local
hard drive. Select a location on your computer to
back up the file. You can name the configuration
file.
Click Browse to select the configuration file of
device and then click Update Settings to begin
updating the device configuration.

MAINTAINANCE

46