Section 4 – Troubleshooting
NAT Forwarding
Choose ADVANCED > NAT > FTP ALG config. The page shown in the right
figure appears.
This page is used to configure FTP Server ALG and FTP Client ALG ports .
NAT IP Mapping
Choose ADVANCED > NAT > NAT IP Mapping. The page shown in the right
figure appears.
Entries in this table allow you to config one IP pool for specified source ip
address from lan,so one packet which's source ip is in range of the specified
address will select one IP address from pool for NAT.
Logout
Choose ADVANCED > Logout. The page shown in the right figure appears. In
this page, you can log out of the configuration page.
D-Link DSL-2740E User Manual
45