Status; Software Status; Security - D-Link DCM-604 User Manual

Cable modem emta gateway packetcable 1.5 and docsis 2.0 certified 4 ports ethernet cable router with 2 ports voice

Hide thumbs Also See for DCM-604:

Table of Contents

DCM-604 Cable Modem EMTA Gateway

There are seven categories in this web management including Status, Basic,

Advanced and Firewall. The following sections describe their details.

5.2

Status

The Status page shows hardware and software information about the DCM-

604 that may be useful to your cable service provider.

The Software page shows how long the DCM-604 has operated since last

being powered up, and some key information the DCM-604 received during

the initialization process with your cable service provider.

(Pls change the screen capture. Pls use f/w 4k)

This page allows the configuration of administration access privileges and the

ability to restore the settings to factory defaults to the system and allows switching

to router or bridge mode. If DCM-604 mode set as bridge, the "basic", "advance"

and "firewall" tabs of webpage will be disabled. The DCM-604 home page will

change to 192.168.100.1. And to access home page, need to set up connected

device (PC) IP address as 192.168.100.xx. After changing the settings, click Apply,

then the modem will reboot to take effect setting. And wait for DCM-604 boot up

completes.

User's Manual

Table of Contents

Show Quick Links

Table of Contents