Routing - D-Link DSL-2740E User Manual

Section 4 – Troubleshooting

Routing

Static Routing
Choose ADVANCED > Routing > Static Route. The page shown in the right
figure appears. This page is used to configure the routing information. In this
page, you can add or delete IP routes.
The following table describes the parameters of this page.
Field
Destination
Subnet Mask
Next hop
Metric
Interface
Click Add Route to add a static route.
IPv6 Static Routing
Choose ADVANCED > Routing > IPv6 Static Route. The page shown in the
right figure appears. This page is used to configure the routing information. In
this page, you can add or delete IP routes.
Click Add to add a static route.
The following table describes the parameters of this page.
Field
Destination
Prefix length
Next Hop
Interface
D-Link DSL-2740E User Manual
Description
The destination IP address of the router.
The subnet mask of the destination IP
address.
The gateway IP address of the router.
The cost of this route.
The interface name of the router output
port.
Description
The destination IP address of the static
route.
The length of prefix for this route.
The gateway IP address of the static route.
The interface name of the static route.
42