Page 1
How to setup IPTV on DSL-2544N modem router This document details how to setup your modem router for IPTV.
Page 2
1. Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-Link modem in the address bar: http://192.168.1.1 2. When prompted type in the Username and Password then click on the “Log In” button.
Page 3
3. Click on SETUP > Internet Setup. In the DSL Setup section click on the 'Add' button: Support – How to setup modem router for IPTV D-Link Technical Page 3 of 8...
Page 4
Enable Service box: ticked. VPI: 0 VCI: 35 (VPI and VCI values depend on your Internet Provider settings). After that click on the Apply button. Support – How to setup modem router for IPTV D-Link Technical Page 4 of 8...
Page 5
5. Your DSL SETUP configuration should now have two entries. Support – How to setup modem router for IPTV D-Link Technical Page 5 of 8...
Page 6
6. Click on ADVANCED > Network Tools and click on the “IGMP Snooping” button: 7. Tick the Enabled box and click on the Apply button: Support – How to setup modem router for IPTV D-Link Technical Page 6 of 8...
Page 7
E.g. for TPG the IPTV Page is http://www.tpg.com.au/iptv Log into IPTV page with your provider login details. Click the [Always run on this site] button for VLC Web Plugin. Support – How to setup modem router for IPTV D-Link Technical Page 7 of 8...
Page 8
Click one of the Channel list to view the IPTV broadcast: Support – How to setup modem router for IPTV D-Link Technical Page 8 of 8...
Need help?
Do you have a question about the DSL-2544N and is the answer not in the manual?
Questions and answers