Figure 16. Image (Firmware) Upgrade - D-Link DSL-300G User Manual

Reboot Options
Select the reboot option from the pull-down menu. The options are a described here:
Reboot
Reboot From Last
Configuration
Reboot From Backup
Configuration
Reboot From Default
Configuration
Type in the full path and file name of the firmware file to be uploaded.
Upgrade File: Alternatively you may click the Browse button to search for the file on your
system.
When the filenames have been entered, click the Upload button to commence loading the firmware file. If the
upload is successful, a message informs you that is was successfully loaded and asks you to reboot the device.
Go to the Reboot menu and perform and simple reboot. If the firmware does not load, an error message informs
you to try the upload again. Check the filenames and attempt to upload again. If the file still will not load, reboot
the device and try again.
DSL-300G ADSL Modem User's Guide
A simple reboot. This will put into effect any configuration changes that
have been successfully committed to flash memory.
This will reboot the device using the current settings in permanent memory,
including any changes you just committed.
This will
reboot the device using settings stored in backup memory. These are
the settings that were in effect before you committed new settings in the current
session.
This reboots the device to default settings provided by your ISP or the
manufacturer. Choosing this option erases any custom settings.

Figure 16. Image (Firmware) Upgrade

24