Routing - D-Link DSL-526B User Manual

Section 3 – Configuration

Routing

To access the Routing windows, click the Routing link in the Advanced Setup directory.
If the Enable Automatic Assigned Default Gateway checkbox is
ticked, the Router will accept the first default gateway assignment
received from one of the enabled PPPoA, PPPoE, or MER/DHCP enabled
PVC(s).
If this checkbox is not ticked, enter the static default gateway and/or a
WAN interface. Click the Save/Apply button when you are finished.
To add a new static route click on the Static Route link in the Routing
directory.
Click the Add button to access the following window.
Enter the static routing information for an entry to the routing table.
Click the Save/Apply button when you are finished.
To activate the RIP protocol on the Router click on the RIP link in the
Routing directory.
D-Link DSL-526B User Manual 62