Turn Signals; Lane Change Assist; Flash-To-Pass; High/Low Beam Switch - Jeep Grand Cherokee 2016 Owner's Manual

Hide thumbs Also See for Grand Cherokee 2016:

Table of Contents

178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Turn Signals

Move the multifunction lever up or down and the arrows

on each side of the instrument cluster flash to show

proper operation of the front and rear turn signal lights.

NOTE: If either light remains on and does not flash, or

there is a very fast flash rate, check for a defective outside

light bulb. If an indicator fails to light when the lever is

moved, it would suggest that the indicator bulb is

Tap the lever up or down once, without moving beyond

the detent, and the turn signal (right or left) will flash

three times then automatically turn off.

You can signal another vehicle with your headlights by

partially pulling the multifunction lever toward the steer-

ing wheel. This will cause the high beam headlights to

turn on until the lever is released.

Push the multifunction lever toward the instrument

panel to switch the headlights to high beam. Pulling the

multifunction back toward the steering wheel will turn

the low beams back on, or shut the high beams off.

Table of Contents