Jeep Grand Cherokee 2016 Owner's Manual page 356

354 UNDERSTANDING YOUR INSTRUMENT PANEL
• Tilt Mirrors In Reverse
When this feature is selected, the exterior sideview
mirrors will tilt downward when the ignition is in the
RUN position and the transmission shift lever/gear
selector is in the REVERSE position. The mirrors will
move back to their previous position when the transmis-
sion is shifted out of REVERSE. To make your selection,
press the "Tilt Mirrors In Reverse" button on the touch-
screen and make your selection.
• ParkView Backup Camera Active Guidelines
Your vehicle may be equipped with the ParkView Rear
Back Up Camera Active Guidelines that allows you to see
active guidelines over the ParkView Back up camera
display whenever the shift lever/gear selector is put into
REVERSE. The image will be displayed on the radio
touchscreen display along with a caution note to "check
entire surroundings" across the top of the screen. After
five seconds, this note will disappear. To make your
selection, press the "ParkView Backup Camera Active
Guidelines" button on the touchscreen and make your
selection.
• ParkView Backup Camera Delay
When the vehicle is shifted out of REVERSE (with camera
delay turned OFF), the rear camera mode is exited and the
navigation or audio screen appears again. When the vehicle
is shifted out of REVERSE (with camera delay turned ON),
the rear view image with dynamic grid lines will be
displayed for up to 10 seconds after shifting out of "RE-
VERSE" unless the forward vehicle speed exceeds 8 mph
(12 km/h), the transmission is shifted into PARK or the
ignition is switched to the OFF position. To set the
ParkView Backup Camera Delay push the MORE button on
the faceplate, the "settings" button on the touchscreen, then
the "Safety & Driving Assistance" button on the touch-
screen. Press the "Parkview Backup camera Delay" button
on the touchscreen to turn the ParkView Delay ON or OFF.