To Exit Remote Start Mode And Drive The Vehicle; Comfort Systems - If Equipped - Jeep Grand Cherokee 2016 Owner's Manual

NOTE: To avoid unintentional shut downs, the system
will disable the one time push of the REMOTE START
button for two seconds after receiving a valid Remote
Start request.

To Exit Remote Start Mode And Drive The Vehicle

Before the end of the 15-minute cycle, push and release
the UNLOCK button on the RKE transmitter to unlock
the doors and disarm the Vehicle Security Alarm System
(if equipped). Then, prior to the end of the 15 minute
cycle, push and release the START/STOP button.
NOTE: "Remote Start Active — Push Start Button" will
display in the Driver Information Display (DID) until
you push the start button. Refer to "Driver Information
Display (DID)" in "Understanding Your Instrument
Panel" for further information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31
Comfort Systems — If Equipped
When Remote Start is activated, Auto-Comfort will work
anytime the temperature conditions are correct. When
the feature is enabled, regardless of Remote Start or
regular keyless start, the driver heated seat features will
automatically turn on in cold weather. In warm weather,
the driver vented seat feature will automatically turn on
when the Remote Start is activated. These features will
stay on through the duration of Remote Start or until the
ignition switch is turned to the ON/RUN position.
The Comfort System can be activated and deactivated
through the Uconnect system. For more information on
Comfort System operation, refer to "Uconnect Settings"
in "Understanding Your Instrument Panel."
2