Jeep Grand Cherokee 2016 Owner's Manual page 355

• Show Command List
When in this display, you may change the Show Com-
mand List settings. To change the Show Command List
settings, press the "Show Command List" button on the
touchscreen and select from "Always," "With Help" or
"Never."
Clock & Date
After pressing the "Clock & Date" button on the touch-
screen the following settings will be available:
• Set Time & Format
When in this display, you may set the time and format
manually. Press the "Set Time" button then choose from
a "12 hour" or "24 hour format." Press the corresponding
arrow above and below the current time to adjust, then
select "AM" or "PM."
UNDERSTANDING YOUR INSTRUMENT PANEL 353
• Set Date
When in this display, you may set the date manually.
Press the "Set Date" button then press the corresponding
arrows above and below the current date to adjust.
Safety/Assistance
After pressing the "Safety/Assistance" button on the
touchscreen the following settings will be available:
• ParkSense
The ParkSense system will scan for objects behind the
vehicle when the transmission shift lever/gear selector is
in REVERSE and the vehicle speed is less than 11 mph (18
km/h). It will provide an alert (audible and/or visual) to
indicate the proximity to other objects. The system can be
enabled with Sound Only, or Sound and Display. To
change the ParkSense status, press and release the
"Sound Only" or "Sounds and Display" button. Refer to
"ParkSense" in "Understanding The Features Of Your
Vehicle" for system function and operating information.
4