Paper Feed Motor Unit Removal - Epson GT-1200 Service Manual

ADF

4.2.7 Paper Feed Motor Unit Removal

This section describes the procedure for removing the paper feed motor in
the paper feed unit.
1. Remove the paper feed unit. (See Section 4.2.4.)
2. Loosen the screw and remove the harness cover.
3. Release all cables from the cable hooks attached to the paper feed
motor unit.
4. Remove 4 fixing screws and remove the paper feed motor unit.
Remove the harness cover.
Figure 4-12. Harness Cover Removal
Rev. A
Screw
Screw
Remove all cables
from the hooks.
Screw
Figure 4-13. Paper Feed Motor Unit Removal
Disassembly and Assembly
Screw
(See the figure below.)
Screw
Remove all cables
from the hooks.
4-8