Port Configuration - Tripp Lite B030-008-17-IP Owner's Manual

11. KVM Web Interface
If a port is chosen in the Sidebar, the Main panel consists of three columns: Name, Access and Config:
• Name lists all users that have been created.
• The Access column is where device access rights are set. To cycle through the choices, click the icon in the row that corresponds to the user
to be configured. The icons are as follows:
(Full Access) – The user can view the remote screen and perform operations on the remote server from his/her keyboard and
monitor.
(View Only) – The user can only view the remote screen and cannot perform any operations.
(No Access) – No access rights; the Port will not appear on the User's list on the Main Screen.
• Config sets or denies permission for the user to make changes to a port's configuration settings. A check mark ( √ ) indicates a user has
permission; an X indicates a user does not have permission.

11.10 Port Configuration

The Port Configuration subsection allows Super Administrators and Administrators to edit port properties settings and add/remove associated
links. When the master KVM is highlighted and the Port Configuration subsection is selected, the following screen appears.
The only setting that appears on this page is the Occupy Timeout setting. This setting controls the amount of inactivity time before a port set
to Occupy (see Access Mode in the table on the following page for details) is opened for access by another user. Enter a value from 0 to 255
seconds. The default is 3 seconds.
42