Network Setup - Ip Address Configuration; Local Console - Tripp Lite B030-008-17-IP Owner's Manual

7. Installation
7.6 Network Setup – IP Address Configuration
By default, the KVM will automatically have an IP address assigned via DHCP server. To configure a fixed IP address, you will need to access
the KVM switch in one of three ways: Local Console, IP Installer or Browser.

7.6.1 Local Console

Note: The local console OSD only allows IPv4 network settings configuration. For IPv6, access the Web Management Interface.
1. When accessing the console KVM switch for the first time, a prompt will appear asking for a username and password. The default
Username is administrator, and the default Password is password. For security purposes, changing the username and password is
strongly recommended. Once the default username and password are entered, the OSD Main page will appear.
2. Press the [F4] key to open the OSD ADM page.
3. In the OSD ADM page, highlight SET IP ADDRESS and press [Enter]. The following screen appears.
4. By default, the Obtain an IP address automatically (DHCP) option is selected. To manually assign an IP address, check the radio button next
to the Use the following IP address option.
5. You can then navigate to the IP Address, Subnet Mask and Default Gateway fields by entering the settings suitable for your network. Upon
changing the KVM's IP Address settings, the Reset on Exit function of the F4: ADM menu will be automatically activated. Upon logging
out, the new settings will be saved for use going forward. If you go into the F4: ADM menu and clear the Reset on Exit check mark before
logging out, the changed settings will be ignored and the original IP Address settings will remain in effect.
Note: Although the changed IP settings are ignored, they still remain in the network settings fields. The next time a page is opened, the Reset on Exit box
will automatically be enabled. When the switch resets, the new IP settings will become the ones used by the switch. To avoid this problem, go back to the
network settings page and ensure the desired IP settings appear in the fields.
16