Tripp Lite B030-008-17-IP Owner's Manual page 25

9. KVM Operation
Reset Default Values
Clicking this button undoes all Customization page changes that have been made to the B030-008-17-IP and returns the parameters to the
original factory default settings. The reset values include the following items:
• Security
– Mode: Enable ICMP , Enable Multiuser Operation, Enable Virtual Media Write Operation, Browser Service
– Login Failures: Allowed/ Timeout
• Network
– Network Transfer Rate reset to 99999
• Port Configuration
– Device Level: Occupy timeout setting
• Operating mode
– Force All to Grayscale, Enable Client AP device list, Keyboard/Mouse Broadcast, Console Keyboard language
• Port Level
– Port Properties: Port OS, Access Mode, OS language
Reset on Exit
The Reset on Exit function resets the KVM upon logout to save changes to the IP Address Settings page. When assigning new IP Address
settings, this function will automatically be activated. If you clear the check mark before logging out, the changed settings will be ignored and
the original IP Address settings will remain in effect.
Note: Even though the changed IP settings are ignored, they still remain in the network settings fields. In effect, the next time this page is opened, the reset on
exit box will automatically be enabled. When the switch resets, the new IP settings that were discarded will be used by the switch. To avoid this problem, go back
to the network settings page to ensure the desired IP settings appear in the fields.
F5: SCAN
Clicking on the F5 field at the top of the OSD Main screen or pressing the [F5] key initiates Auto Scan mode. This function automatically
switches among the available computers at regular intervals to monitor their activity without the hassle of having to switch manually. To exit
Auto Scan mode, press the [Spacebar] or [Esc].
F7: Close OSD
Clicking the X field in the upper-right corner of the OSD Main screen or pressing the [F7] key will exit the OSD display.
F8: Logout
Clicking the ZZZ field in the upper-right corner of the OSD Main screen or pressing [F8] performs a logout of the OSD and clears the console
screen. This action differs from simply pressing [Esc] at the main screen to deactivate the OSD; the [F8] key requires logging in again to regain
access to the OSD, whereas with [Esc], re-entering the OSD simply requires pressing the OSD hotkey.
Notes:
• When re-entering the OSD after logging out, the screen will remain blank except for the OSD main screen. The username and password must be entered
before continuing.
• If re-entering the OSD after logging out and immediately using the [Esc] key to deactivate the OSD without having selected a port from the OSD menu, a
null port message will display on the screen. The OSD hotkey will open the main OSD screen.
Ctrl + T: Select Tree List
This function broadens or narrows the number of ports the OSD displays on the main screen.
Ctrl + L: Select Favorites
Select which favorites to find.
Ctrl + P: Toggle Powered On
Lists only the ports with connected computers powered on.
Ctrl + F: Search Port Name
Upon entering a search string and clicking Search, only port names matching the search string will display in the tree.
25