Tripp Lite B030-008-17-IP Owner's Manual page 24

9. KVM Operation
Set IP Address
The KVM can have an IP address assigned dynamically (DHCP) or be given a fixed IP address.
• Obtain an IP address automatically (DHCP) – This option is selected by default. If the Use the following IP address option is selected instead,
check the radio button next to the Obtain an IP address automatically (DHCP) option to switch.
• Use the following IP address – To manually configure the IP address, check the radio button next to the Use the following IP address option.
Then navigate to the IP Address, Subnet Mask and Default Gateway fields, and enter the settings suitable for your network. Upon changing
the IP Address settings of the KVM, the Reset on Exit function of the F4: ADM menu will be automatically activated. Upon logging out, the
new settings will be saved for future use. By going into the F4: ADM menu and clearing the Reset on Exit check mark before logging out, the
changed settings will be ignored and the original IP Address settings will remain in effect.
Note: Even though the changed IP settings are ignored, they still remain in the network settings fields. In effect, the next time this page is opened, the reset
on exit box will automatically be enabled. When the switch resets, the new IP settings that were discarded will be used by the switch. To avoid this problem, go
back to the network settings page to ensure the desired IP settings appear in the fields.
KM Broadcast
Keyboard and Mouse inputs can be sent to all of the connected computers at the same time. This can be useful in situations such as
performing a system-wide shutdown, installing or upgrading software, etc. This function is disabled by default.
• If you enable Keyboard Broadcast, your keystrokes will be sent to all connected computers that currently appear in the Sidebar.
• If you enable Mouse Broadcast, your mouse movements and clicks will be sent to all connected computers that currently appear in the
Sidebar.
Disable Dev Authentication
The function disables KVM access by all local user accounts. Users can only login using authentication via RADIUS, LDAP , LDAPS, or MS active
Directory.
Clear Port Names
Use this function to clear all port names.
24