Rear View - Tripp Lite B030-008-17-IP Owner's Manual

5. System Requirements
No. Component
1
Handle
2 LCD Module
3 LCD Controls
4 LCD On / Off Button
5 Port Selection
Buttons and LED
6 Keyboard Module
7 Touchpad
8 USB Port
9 Power LED
10 Rack Mounting Tabs
11 Lock LEDs
12 Reset Switch

Rear View

1
5
No. Component
1 Power Socket
2 Power Switch
3 External Console
Section
4 KVM Port Section
5 Grounding Terminal
Description
Pull to slide the KVM module out; push to slide it in.
After sliding out the KVM module, flip up the cover to access the LCD monitor.
The buttons to control the position and picture settings of the LCD monitor are located here.
Push this button to turn the LCD monitor on and off. The button illuminates when the LCD monitor is off.
Note: The light indicates that only the monitor is off, not the attached KVM switch.
To access a port, press its corresponding selection button. Indicator LEDs are built into the switches, with an
Online LED to indicate that the computer attached to its corresponding port is up and running, and a Selection
LED light to indicate which port has the KVM focus.
• Press buttons 1 and 2 at the same time for 5 seconds to perform a keyboard/mouse reset.
• Press buttons 7 and 8 at the same time for 2 seconds to initiate an Auto Scan.
Standard 99-key keyboard.
Standard mouse touchpad.
The USB 1.1 hub port connects a USB peripheral device (flash drive, CD-ROM drive, etc.) to the console or a
USB mouse for users who prefer to use an external mouse.
Illuminates blue to indicate the device is receiving power.
Rack mounting tabs are located at each corner of the device.
The Num Lock, Caps Lock, Scroll Lock LEDs are located here.
Located to the right of the Lock LEDs. Press this recessed switch using a thin object to perform a system reset.
2 3
Description
This is a standard 3 prong AC power socket. The power cord from an AC source plugs in here.
This is a standard rocker switch that powers the device on and off.
Supports an independent, external KVM console for flexibility and convenience. The external console's USB
keyboard and mouse, HDMI monitor, and audio cables plug in here.
Connects the device's ports to computers / servers using HDMI and USB cables. (see Optional Accessories
in section 3 for the KVM cable kit model)
The included grounding wire attaches here.
4
7