Fcc Information; User Notice; Package Contents - Tripp Lite B030-008-17-IP Owner's Manual

1. FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded
cables and connectors with this equipment. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the
user's authority to operate this equipment.

2. User Notice

All information, documentation, and specifications contained in this manual are subject to change without prior notification by the
manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's software described in
this manual is sold or licensed "as is." Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its
distributor, or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from
any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It
is the responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not
selected prior to operation. VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

3. Package Contents

• B030-008-17-IP Console KVM Switch with IP Access
• (x2) High Speed HDMI Cables – 6 ft.
• (x2) USB 2.0 A/B Cables – 6 ft.
• IEC C13 to NEMA 5-15P Power Cord
• Grounding Wire
• Quick Start Guide
• CD with Owner's Manual
Check to ensure all components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.
Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other
devices on the installation.
Optional Accessories
• N201-Series Cat6 Gigabit Snagless Patch Cables
• P006-Series IEC C13 to NEMA 5-15P Power Cords
• P782-XXX-DH* HDMI/DVI + USB KVM Cable Kits
*XXX refers to the length, with cables available in 6 ft. (006), 10 ft. (010) and 15 ft. (015) lengths
4