Enter Initial Calibrations - Dexcom G5 Getting Started Manual

6.7 Enter Initial Calibrations

At the end of the 2-hour sensor warmup, you must enter two meter values before any
readings will show.
If you are setting up two devices, you only need to do these steps for one.
1
2
3
4
When prompted, enter the first of two
meter values.
You may have to unlock your screen first.
If so, tap 1, then 2.
Wash hands with soap and water, never gel
cleaners. Dry your hands.
Washing and drying your hands before using
your meter helps ensure accuracy.
Take a measurement using your meter.
Use fingertips only.
Tap the Up and Down Arrows to enter the
exact value from your meter.
Tap DONE.
Dexcom G5 Mobile CGM System Getting Started Guide • 28