Attach Transmitter - Dexcom G5 Getting Started Manual

6.4 Attach Transmitter

Once you have inserted the sensor, you need to attach your transmitter to the sensor
pod.
Wider Side
1
2
3
4
Clean the back of your transmitter with an
alcohol wipe.
Let dry.
Place the transmitter in the sensor pod with
the flat side down, and thinner side away
from the transmitter latch.
Place one finger on the transmitter to keep
it in place. With your other hand, pull the
transmitter latch up and forward until you
hear two clicks.
Hold the sides of your sensor pod with one
hand. Remove the transmitter latch with the
other hand by quickly twisting off the latch
away from your body.
Dexcom G5 Mobile CGM System Getting Started Guide
Thinner Side
• 26