Dexcom G5 Getting Started Manual page 28

4
5
6
7
8
9
10
11
25 • Dexcom G5 Mobile CGM System Getting Started Guide
Remove the adhesive backing from the
sensor pod, one half at a time.
Place the sensor pod horizontally on your skin.
Hold the applicator and pull the safety lock
straight out.
Place the fingers of one hand at the edge of
the white adhesive.
You may pinch up on your skin using this hand.
Place two fingers ABOVE the collar and your
thumb on the white plunger. Push down the
plunger. You should hear 2 clicks.
Move your two fingers from above the collar to
2 "clicks"
below the collar. Pull the collar back towards
your thumb until you hear 2 clicks or cannot
pull back any more.
Squeeze the ribbed tabs on the sides of the
sensor pod.
While squeezing the tabs, rock the applicator
barrel forward and away from your body.
Throw away applicator following local
ordinances.
Move your fingers around the adhesive patch
three times to secure the tape to your skin.