System Debugging - 3Com 7700 Configuration Manual

16 C 11: S M
HAPTER YSTEM

System Debugging

ANAGEMENT
Commands for displaying the system statistics information
■
For the display commands related to each protocols and different ports, refer to
the relevant chapters. The following display commands are used for displaying
the system state and the statistics information.
Perform the following operations in all views.
Table 32 The Display Commands of the System
Operation
Display the system clock
Display the system version
Display the terminal user
Display the saved-configuration
Display the current-configuration
Display the state of the debugging
Enable/disable the terminal debugging
The Switch 7700 provides various ways for debugging most of the supported
protocols and functions, which can help you diagnose errors.
The following switches control the outputs of debugging information:
Protocol debugging switch controls debugging output of a protocol.
■
Terminal debugging switch controls debugging output on a specified user
■
screen.
The figure below illustrates the relationship between two switches.
Command
display clock
display version
display users [ all ]
display saved-configuration
display current-configuration
display debugging [ interface { interface-name |
interface-type interface-number } ] [ module-name ]