3Com 7700 Configuration Manual page 285

The Ethernet switch provides the following FTP services:
FTP server: You can run FTP client program to log in the server and access the
■
files on it.
FTP client: After connected to the server through running the terminal emulator
■
or Telnet on a PC, you can access the files on it, using FTP command.
FTP Server configuration includes:
Enable/Disable FTP Server
■
Configure the FTP Server Authentication and Authorization
■
Configure the Running Parameters of FTP Server
■
Display and debug FTP Server
■
Enable/Disable FTP Server
You can use the following commands to enable/disable the FTP server. Perform the
following configuration in system view.
Table 8 Enable/Disable FTP Server
Operation
Enable the FTP server
Disable the FTP server
FTP server supports multiple user access. A remote FTP client sends a request to the
FTP server. Then, the FTP server carries out the corresponding operation and
returns the result to the client.
By default, FTP server is disabled.
Configure the FTP Server Authentication and Authorization
You can use the following commands to configure FTP server authentication and
authorization. The authorization information of FTP server includes the top
working directory provided for FTP clients.
Perform the following configuration in system view.
Table 9 Configure the FTP Server Authentication and Authorization
Operation
Create new local user and enter
local user view (system view)
Delete local user (system view)
Configure password for local user
(local user view)
Configure service type for local user
(local user view)
Cancel password for local user
(local user view)
Cancel service type for local user
(local user view)
File System Management
Command
ftp server enable
undo ftp server
Command
local-user username
undo local-user [ username | all [ service-type ftp ]]
password [ cipher | simple ] password
service-type ftp ftp-directory directory
undo password
undo service-type ftp [ftp-directory]
5