Ike Profile; Ike Proposal - HP FlexFabric 7900 Series Command Reference Manual

Predefined user roles
network-admin
Parameters
seconds: Specifies the NAT keepalive interval in seconds, in the range of 5 to 300.
Usage guidelines
This command takes effect only for a device behind a NAT server. When the device resides behind a
NAT server, the IKE gateway behind the NAT server needs to send NAT keepalive packets to its peer IKE
gateway to keep the NAT session alive.
Examples
# Set the NAT keepalive interval to 5 seconds.
<Sysname> system-view
[Sysname] ike nat-keepalive 5

ike profile

Use ike profile to create an IKE profile and enter IKE profile view.
Use undo ike profile to delete an IKE profile.
Syntax
ike profile profile-name
undo ike profile profile-name
Default
No IKE profile is configured.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IKE profile name, a case-insensitive string of 1 to 63 characters.
Examples
# Create IKE profile 1 and enter its view.
<Sysname> system-view
[Sysname] ike profile 1
[Sysname-ike-profile-1]

ike proposal

Use ike proposal to create an IKE proposal and enter IKE proposal view.
Use undo ike proposal to delete an IKE proposal.
Syntax
ike proposal proposal-number
165