State (Local User View); User-Group - HP FlexFabric 7900 Series Command Reference Manual

Related commands
display local-user

state (local user view)

Use state to set the status of a local user.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
A local user is in active state.
Views
Local user view
Predefined user roles
network-admin
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network services.
Usage guidelines
This command only applies to the local user.
Examples
# Place the device management user user1 in blocked state.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] state block
Related commands
display local-user

user-group

Use user-group to create a user group and enter its view.
Use undo user-group to delete a user group.
Syntax
user-group group-name
undo user-group group-name
Default
There is a user group named system in the system.
27