Primary Authorization - HP FlexFabric 7900 Series Command Reference Manual

[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authentication 10.163.155.13 49 key simple
123456TESTauth&!
Related commands
display hwtacacs scheme
•
• key (HWTACACS scheme view)
secondary authentication (HWTACACS scheme view)
•

primary authorization

Use primary authorization to specify the primary HWTACACS authorization server.
Use undo primary authorization to remove the configuration.
Syntax
primary authorization ipv4-address [ port-number | key { cipher | simple } string | single-connection ]
*
undo primary authorization
Default
No primary HWTACACS authorization server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary HWTACACS authorization server.
port-number: Specifies the service port number of the primary HWTACACS authorization server, a TCP
port number in the range of 1 to 65535. The default setting is 49.
key { cipher | simple } string: Sets the shared key for secure communication with the primary
HWTACACS authorization server.
cipher string: Sets a ciphertext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 373 characters.
In FIPS mode, the key is a string of 15 to 373 characters.
simple string: Sets a plaintext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 255 characters.
In FIPS mode, the key is a string of 15 to 255 characters and must contain digits, uppercase
letters, lowercase letters, and special characters.
single-connection: The device and the primary HWTACACS authorization server use the same TCP
connection to exchange all authorization packets for all users. If you do not specify this keyword, the
device establishes a new TCP connection each time it exchanges authorization packets with the primary
authorization server for a user. If the HWTACACS server supports the single-connection method, HP
recommends that you specify this keyword to reduce TCP connections for improving system performance.
61