Authentication-Method - HP FlexFabric 7900 Series Command Reference Manual

authentication-method

Use authentication-method to specify an authentication method to be used in an IKE proposal.
Use undo authentication-method to restore the default.
Syntax
authentication-method pre-share
undo authentication-method
Default
The IKE proposal uses the pre-shared key as the authentication method.
Views
IKE proposal view
Predefined user roles
network-admin
Parameters
pre-share: Specifies the pre-shared key as the authentication method.
Usage guidelines
Pre-shared key authentication does not require certificates as signature authentication, and it is easy to
set up in a simple network.
Authentication methods configured on both IKE ends must match.
You must configure the pre-shared keys on both IKE ends.
Examples
# Specify pre-shared key authentication to be used in IKE proposal 1.
<Sysname> system-view
[Sysname] ike proposal 1
[Sysname-ike-proposal-1] authentication-method pre-share
Related commands
display ike proposal
•
ike keychain
•
• pre-shared-key
dh
Use dh to specify the DH group to be used in key negotiation phase 1 for an IKE proposal.
Use undo dh to restore the default.
Syntax
In non-FIPS mode:
dh { group1 | group14 | group2 | group24 | group5 }
undo dh
151