Urpf Commands; Display Ip Urpf - HP FlexFabric 7900 Series Command Reference Manual

uRPF commands

display ip urpf

Use display ip urpf to display uRPF configuration.
Syntax
In standalone mode:
display ip urpf [ slot slot-number ]
In IRF mode:
display ip urpf [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument specifies the ID of the IRF member device, and the slot number argument specifies the number
of the slot that holds the card. (In IRF mode.)
Examples
# (In standalone mode.) Display uRPF configuration for the card in slot 3.
<Sysname> display ip urpf slot 3
Global uRPF configuration information(failed):
Check type: strict
Allow default route
Table 33 Command output
Field
Global uRPF configuration information
(failed)
Check type
Allow default route
Description
Global uRPF configuration.
Failed to deliver the uRPF configuration to the
forwarding chip because of insufficient chip
resources. If this field does not exist, the delivery is
successful.
uRPF check mode: loose or strict.
Allow use of the default route.
219